Advertisement
Note to customers who installed the Beta Release 1.0 distribution from Holt IC
If you installed the Holt Mini PCIe Dual2130VS release, then the following applies:
During that procedure, Holt asked that you place your host development Windows 10 system in test driver
signing mode. You now need to disable that (unless you need test-signing mode for reasons outside of the
Holt Mini PCIe driver installation) and then uninstall the Holt Mini PCIe Driver. This is done as follows:
1. To remove test signing mode, open an Administrator Cmd shell and execute :
bcdedit.exe –set TESTSIGNING OFF
2. To uninstall the device drive, right mouse-click the Win10 Start icon and select the Device Manager
then select and expand the Holt PCIe Device. If you have multiple cards, you will see multiple entries
as in the following display. Select Uninstall device and when the uninstall dialogue opens, select the
option to "Delete the driver software for this device" and then click Uninstall. Repeat this for all Holt
PCIe devices. When complete, pull down the Action dialogue and select Scan for hardware changes.
Holt Integrated Circuits
7
Advertisement
