Epg (Electronic Programme Guide); Timer Reservation; Game; Additional Functions - AEG DVB-S 4540 Instruction Manual

AEG_BDA_DVB_S4540_GB_k.qxd:CL_BDA_DVB_T776_GB_ka.qxd

EPG (Electronic Programme Guide)

Your digital receiver is equipped with an electronic
programme guide. With this feature you can
view the programme information of one or more
programmes on the display. You can get an
overview on the currently running broadcasts or
on the broadcasts of the day.
The EPG features enable you to:
• view information on programme contents on the
display (Detail);
• to preselect broadcasts to be automatically
switched on when they start;
• to programme broadcasts (Book).
This function can only be used if it is supported
by the selected station.
In order to display the Electronic Programme
Guide, press the "EPG" button.
The Electronic Programme Guide is displayed. On
the left side of the screen you will see the channel
list and on the right side the list of programmes. In
the upper section the current date is displayed
together with a miniature picture of the programme
that is currently on.
Please note the messages at the bottom edge of the
screen for further instructions. The coloured buttons
on the remote control correspond to those on the
screen.
Press the "EXIT" button in order to hide the
window.
Preselection/programming of broadcasts:
Press the EPG key. The Programme Overview
window will be displayed.
With the arrow keys M CH-, L CH+,
VOL- you can select the channel or the
desired programme.
Press the "red" button. A new window is opened.
To change the data predefined by the channel
(start/end time, etc.) select the corresponding
line using the "M CH-" and "L CH+" arrow keys.
In the "Timer Mode" line, choose between the
"Recording" and "Timer" options.
Recording = Connect a USB storage device.
When the start time comes, the
selected show will be recorded to the
connected USB storage device.
Timer = If the start time of the selected
broadcast has been reached,
the device switches to this broadcast/
channel.
Press the "OK" button in order to adopt the
settings.
Press the 'EXIT' key to return to the TV programme.
02.09.2009
Time Reservation
The receiver can be programmed to switch to a
specific channel at the desired time. You can use
this function, for example, to record a show to
a video recorder or onto a USB storage device.
Furthermore, you can programme the receiver in
a way that it switches on or off or that a short
message is displayed at a specific time.
Set the timer as follows:
In the "SETUP" menu select the "Advance Timer"
submenu.
Use the arrow buttons "M CH-" or "L CH+" to
select a free timer position.
Press the "red" button (Edit) to call up the editing
window.
Select the individual lines using the "M CH-" or
"L CH+" arrow buttons.
Adjust the settings with the "
arrow buttons and the number buttons.
Press the "OK" button to activate the timer.
Press the "EXIT" button in order to return to the
TV programme.
With the "green" button (Del) you can delete a
timer storage location.

Game

You can choose between the "Gomoku" game and
the "Calendar" and "Calculator". Make your selec-
tion and follow the instructions at the bottom edge of
the screen.

Additional functions

Displaying information
This function is only available if the station
broadcasts corresponding data.
You may display the following information on the
current channel.
VOL+,
To display additional information on the screen,
press the "INFO" key.
Press the "INFO" button twice in order to
display details on the current programme such
as frequency, band width, etc.
To return to the normal screen display, press the
"INFO" key again.
Show Channel List
Press the „OK" key to view the list of TV of radio
channels (depending on the type of use).
Now mark a station using the "M CH-" or
"L CH+" arrow keys.
To switch to the marked station, press the "OK" key.
Press the "EXIT" button, in order to return to the
normal screen display.
16:05 Uhr Seite 47
VOL+" and " VOL-"
47