Pvr Function; Time Shift Playback; Epg (Electronic Programme Guide) - AEG DVB-T 4544 Instruction Manual

Купить в интернет-магазине http://clatronic-shop.com.ua
ENGLISH
40
Time Shift Size:
The Time Shift Size will be calculated and set automat-
ically depending on the connected USB storage device
and its current partition. A change is not possible.
Time Shift:
Off: The function is disabled.
Pause: The Time Shift function can be enabled by
pressing the "►II" button.
Auto: The function will be activated immediately
after a programme change.
One Button Recording:
Off: After pressing the "PAGE UP/ " button you
can adjust the recording period.
On: After pressing the "PAGE UP/ " button, the
recording will start immediately. The recording
time will be adjusted according to the settings
that have been saved under "Default Record-
ing Period".
Default Recording Period:
Here you can set the default recording period for the
enabled "One Button Recording" function.
The recording time specifications depend on
the memory capacity of the connected storage
device.

PVR Function

If a USB storage device is connected, you have the pos-
sibility to record broadcasts.
 Press the "PAGE UP " button while you are watching
a programme.
 If you selected "One Button Recording = Off", adjust
the recording period and confirm by pressing the "OK"
button.
It is not possible to switch between channels dur-
ing a PVR recording.
 Press the "PAGE DOWN/ " button if you want to stop a
recording early.
 Confirm the security query by pressing the "OK" but-
ton.
Delete recordings:
 Press the "REC LIST" button to display the Recording
List.
 Select the file in the Recording List you want to delete.
 Press the "red" button. A security query will be shown.
 Press the "OK" button to delete the file.
ТВ-ресивер AEG DVB-T 4544

Time Shift playback

Time Shift playback will be enabled automatically dur-
ing the recording upon pressing the "►II" button. Press
the "►II" again to resume playback from the previously
paused point.
If you have set "Time Shift" to "Auto" under the menu
"Recording Preference", you can use the "FAV " button
to go back to the beginning of the recording.

EPG (Electronic Programme Guide)

Your digital receiver is equipped with an electronic
programme guide. With this feature you can view the pro-
gramme information of one or more programmes on the
display. You can get an overview on the currently running
broadcasts or on the broadcasts of the day.
The EPG features enable you to:
• view information on programme contents on the
• To mark down broadcasts so that the channel will
• to programme broadcasts (Book)
 In order to display the Electronic Programme Guide,
The Electronic Programme Guide is displayed. On the left
side of the screen you will see the channel list and on the
right side the list of programmes. In the upper section the
current date is displayed together with a miniature picture
of the programme that is currently on.
Depending on the file size it may take some time
to delete the file. "Please wait" will be displayed
during the procedure.
Press the " " button to show / remove the
status display.
To ensure a smooth operation of the Time Shift
Function, the connected storage device must be
faster, as with a regular recording.
Broadcasts which have been recorded by using the
Time Shift function will not be saved.
display (Detail)
automatically be switched when the broadcasting is
about to start
This function can only be used if it is supported by
the selected station.
press the "EPG" button.