Summary of Contents for Nitta PolySprint NPS-1205H1
Page 1
PSM-NIT-13004E PolySprint™ Operation Manual Follow this manual when using Nitta PolySprint™ Heat Press. Please pass this manual to PolySprint™ Heat Press users for a safe and trouble-free operation.
In case of an emergency (such as smoke, fire, foul smell), WARNING disconnect the main plug from the socket outlet and contact Nitta or your local distributor or agent in your area for inspection. Failure to disconnect the main plug from the socket outlet may cause fire or electric shock.
Page 4
40°C in the room temperature of 25°C once it has been unplugged. Do not use the Heat Press on a flammable material. WARNING Use of any other product may cause fire. Always use a pre-setter supplied by Nitta. WARNING Use of any other product may cause fire. - 3 -...
Page 5
1 Safety Precautions- Continued- Impressed voltage is distributed in the power cable. WARNING To prevent fire, electric shock or damage, please consider the following: Disconnect the main plug from the socket outlet with your hand. ・ Do not hang or carry the heat controller or the press by the power ・...
Page 6
1 Safety Precautions- Continued- Caution Do not use the PolySprint™ Heat Press outdoors. CAUTION Do not give a strong shock. CAUTION This may cause fire or electric shock injury. When using the PolySprint™ Heat Press on any equipment, use a CAUTION safety catcher for the press so it doesn’t fall or collapse.
2. Confirmation of Product Thank you for choosing our PolySprint™ Heat Press NPS-1205H1/H2. Check that the product is exactly what you have ordered. Use of CAUTION the wrong product may cause fire, electric shock or injury. 2-1)Confirmation of Product Confirm the following items upon accepting delivery of your order. Contact your local sales office or distributor in your area if you find any deficiency or defect in your item.
3. Specifications 3-1)Outline of Heat Press ① PolySprint™ Heat Press is exclusively designed for making finger-endless Nitta PolySprint™ belts and is made up of (1) springs that apply pressure to the belt (2) electronically controlled heating plates ② PolySprint ™...
4. Use Environment Ambient Temperature 5-30 ℃(no condensation) 15~85%RH Ambient Humidity Place of Use Indoors (free from dust, water) Environment No flammable, combustible or corrosive gas; no steam In order to prevent fire or electric shock, do not use the PolySprint WARNING ™...
6. Name of Each Part 6-1)Main Press Body Warning label Temperature label Heat controller Main plug Power cable Handle Heating plate Heater (top) (top) Heating plate (bottom) Heater (bottom) - 9 -...
Page 11
6. Name of Each Part- continued 6-2)Heat controller Power cable Control Cable (from socket outlet) (to press) Upward button In-operation lamp Downward button Heat switch Face plate Suspension fitting Heater output power indicator The indicator goes on and Temperature indication display according controlled output power of the heater.
7. How to Operate PolySprint™ Heat Press 7-1) Power-on Connect the main plug correctly to the socket outlet. Power is supplied to the heat controller and the current temperature of the press is indicated on the heat controller. Now it is possible to confirm and change the set temperature. WARNIN G Be sure to connect an earth line to prevent electric shock.
Page 13
7. How to Operate PolySprint™ Heat Press- continued 7-4) Operation (Heating) To start operation, push and hold the switch. The in-operation lamp lights up and HEAT controlled power is supplied to the heater. Heating begins. ※To avoid malfunction, you always need to push and hold the switch for about HEAT two seconds when turning it on or off.
8. How to Make Belts Endless 8-1) Required Tool a. Heat Press (NPS-1205H1/H2) b. Cooling Press (NPS-1205C) c. Pre-setter ※Pre-setter is required for each belt width. d. Pre-setter Clamp e. Anti-heat Gloves (burn-preventive protection kits) The press body reaches a WARNING high temperature.
Page 15
Pre-setter. Always pre-setter WARNING supplied by Nitta. Use of any other product possibly results in an improper endless joint and may cause fire. Set the silicon sheet on the belt. ※The silicon sheet can be used on each surface.
Page 16
③ Heating Belt Top part of Pre-setter Be sure to wear anti-heat WARNING part Heat gloves in the following procedures. Grasp the press handles and open the mouth of the press. Hold the pre-setter clamps and set the pre-setter in the heat press.
Page 17
④ Cooling the Belt Remove the pre-setter from the heat press by grasping the pre-setter clamps and move the pre-setter to the cooling press. ※ There is no specification in the vertical direction to the cooling press. ※Relax the handles, which apply pressure, and cool for specified time.
There is no indication on the the power cable may be broken. Is the power supplied to the temperature indication display. ※Contact Nitta for more information. socket outlet? Supply the power to the socket outlet. The press is starting to work.
10. Inspection Inspection items date/staff date/staff date/staff date/staff date/staff The power cable is free of damage or destruction. The control cable is free of damage or destruction. The heat controller is free of damage or destruction. All screws of the heat controller are tightened.
11. Warranty and after-sales service 1. Warranty period The warranty period is for one full year after the delivery of the order at your appointed place. 2. Warranty coverage 1) Should the product malfunction due to causes for which our company is responsible during the abovementioned warranty period, our company will provide a replacement product or repair the product free of charge.