Table of Contents
Advertisement
Block Upstream XDS
End Blocking
Deletes all packets in the XDS queue. Packets loaded from Startup Settings
will be removed from the queue but will remain in Startup Settings storage.
<CTRL+A>T -Class00 <ENTER>
<CTRL+A>T Class00 <ENTER>
Blocks all incoming packets of the specified Class. Entering all instead of
Class00 as the parameter will cause all upstream packets to be blocked.
Omitting the Class parameter will cause the block/pass status for each Class to
be reported.
Example: <CTRL+A>T –0100 <ENTER> blocks all upstream XDS packets
in the Current Program Class. <CTRL+A>T 0100 <ENTER> will resume
normal XDS operation.
Copyright © 2009-2014, EEG Enterprises, Inc.
All Rights Reserved.
CB515 HD Caption Legalizer / Relocating Bridge
19
Advertisement
Table of Contents
