Table of Contents
Advertisement
CB515 HD Caption Legalizer / Relocating Bridge
Update
Date/Time
Product Info
Terminal
10
Once you have set up the front panel IP settings, you can leave your Legalizer
and open up a web browser on any PC on the same local network. Navigate to
the IP address that you configured on the Legalizer's front panel; for example,
type 192.168.1.15 into the address bar of the browser if that is the address you
entered into the front panel. If you cannot navigate to the page in your web
browser, check with your network administrator that the IP Address and
Subnet Mask you entered on the Legalizer front panel are valid parameters for
your network, since individual settings vary.
Once the page has loaded, you will see a list on the left panel of the different
web applications installed on your Legalizer. Click any of these links to
navigate to the page for that application.
The Update page enables you to load and apply a software update to the
CB515 through the web interface. First, download the update file to your local
computer. Then, from the Update page, select 'Choose File' to navigate to the
update file path, and 'Upload' to apply the update. Follow any on-screen
instructions to complete the update, and note that some updates may require a
reboot to take effect.
The Date/Time page allows you to manage the CB515's system time. The time
can be set manually (including the option to copy the system time from the
computer being used to access the web configuration page), or it can be set via
NTP; for the latter, you can enter and save up to three NTP server addresses.
Note that the CB515 will maintain an accurate system time even when the unit
is powered off, as it is equipped with an internal battery to power its clock.
The Product Info page contains PDF files of the CB515 manual as well as
software manuals for any installed modules. These files can be downloaded or
viewed in your web browser with a PDF reader such as Adobe Acrobat
Reader.
The Terminal page gives you access to a Smart Encoder command terminal
that emulates the serial port interface to the Legalizer. You can enter any of the
commands detailed in this manual into the Web Terminal, just as you would
through a serial port terminal, using <CTRL+A> and <CTRL+C>.
Copyright © 2009-2014, EEG Enterprises, Inc.
All Rights Reserved.
Advertisement
Table of Contents
