The Display; Manual/Scan/Search - AOR AR1000 Manual

The Display

The LCD display shows you which channel you are looking at, its frequency and
transmission mode, and a number of status indicators. The illustration shows the
LCD display with all the annunciators turned on.
AOR
MANUAL
WFM AM
BANK
435
WIDE RANGE MONITOR

MANUAL/SCAN/SEARCH

These indicators let you know which operation mode the scanner is in.
MANUAL means the scanner is in Manual mode. It will remain on the current
channel until you manually step to the next channel with the MANUAL key, go
directly to a new channel with the BANK key, or enter either the scan or search
mode by pressing the SCAN or SEARCH keys, respectively.
SCAN means the scanner is in Scan mode, scanning a set of entered frequencies
within one or more scan banks. The BANK indicator shows you the scan bank
the scanner is currently scanning.
SEARCH means the scanner is in Search mode, searching sequentially through a
group of frequencies, using the limits supplied by one of ten search banks. You
can tell which search bank it is using since the search bank number will be
displayed under the BANK indicator.
Notice which mode you are in. You will not be able to perform some operations
in certain modes. For example, if you want to go directly to channel 500, you
press BANK 500. This won't work, however, if you are in Scan mode. You must
be in Manual mode (first press MANUAL) before performing this operation.
AR 1000
SCAN SEARCH PROG
L.OUT HOLD
DELAY
LIMIT AUX
311.000
CH
KHz
The Display
BATT
KEY LOCK
MHz
LIGHT
62