Quickly Setting The Starting Scan Or Search Bank - AOR AR1000 Manual

Quick-Choosing Banks

Quickly setting the starting scan or search bank

Once you have set up your scan and search banks, you can start scanning or
searching with any bank you desire by simply pressing the number of the bank
you want. For example, if you have set up all of your scan banks and you press
SCAN, the AR1000 will start scanning at the beginning of bank 0 and move
sequentially through all the banks. If you want it to start scanning at bank 4, just
press 4 on the keyboard. The scanner will immediately start scanning at channel
400 and proceed sequentially through all of the available scan banks. The scanner
will, of course, skip over locked banks.
If you have locked banks 7 and 8 and start scanning, when you press 6, the
scanner will start scanning at channel 600. When it finishes with bank 6 it will
jump to bank 9, since banks 7 and 8 are locked. If you had pressed 7 or 8, the
scanner would have jumped to bank 9. It will always go to the next highest
available bank if the one you select is locked.
This technique works for search banks as well. While in search mode, simply
press the number of the search bank you want to begin searching through. Of
course, you can not jump to a search bank that is locked or unavailable due to
bank limiting. You will go to the next highest available bank.
36