Table of Contents
Advertisement
5.1.7
Speed profile
Speed profile
5.1.8
Itinerary
Proceeding
automatically to the
next stage point...
5.1.9
Time zone
Calculation of arrival
times
5.1.10 Format
Units
Appendix
On the S
PEED PROFILE
entry will have an effect on the calculation of the remaining time
and of the estimated time of arrival (ETA).
Tap the Speed profile button. Select one of the available profiles
and tap OK.
On the I
screen, determine whether you want to
TINERARY
navigate automatically to the next stage point after having
reached a stage point (Yes) or not (No).
Tap the Proceed automatically to next destination button to
toggle between Yes and No.
If you do not proceed automatically, you may proceed as follows:
On the map in navigation mode, tap the Additional functions
icon.
Select Next route point and tap OK.
On the T
screen, select the time zone of the region you
IME ZONE
are currently staying in. This is necessary for the system to
indicate correct times of arrival in navigation mode.
Element
Time zone
Daylight saving
time
On the F
screen, determine which units are to be used for
ORMAT
time and distance indications.
Element
Time
Distance
screen, indicate your speed profile. This
Signification
Tap this entry field to select the time zone
of the region you are currently staying in.
Tap this entry field to switch between
daylight saving time (Yes) and standard
time (No).
Signification
Tap the Time field to toggle between
12 hours (AM/PM) and 24 hours time
format.
Tap the Distance field to toggle between
kilometres or miles distance units.
MEDION-Navigator 4.4
- 73 -
Advertisement
Table of Contents
