Table of Contents
Advertisement
5.1
Configuration of MEDION-Navigator
Configuration
5.1.1
Map information
Info on the map
Appendix
In MEDION-Navigator, you may modify the following settings:
Map information, see below.
Route information, see page 71.
Volume, see page 71.
Representation, see page 72, see page 73.
Touch screen calibration, see page 72
Auto mode, see page 72.
Speed profile, see page 73.
Itinerary, see page 73.
Time zone, see page 73.
Itinerary, see page 73.
Format, see page 73.
Home address, see page 74.
Radio-Mute, see page 74
On the main screen, tap the Settings button to configure
MEDION-Navigator.
On the S
screen, tap the Save button to apply your
ETTINGS
modifications if you have made some.
On the M
AP INFORMATION
modifications:
Element
Info bar
Points of Interest
Street names
screen, you may effect the following
Signification
The Info bar at the bottom of the map
displays the scale of the map, the compass,
and the current speed.
Tap the respective command button to
display (On) or not (Off) the Info bar.
Tap the respective command button to
display (On) or not (Off) Points of
Interest on the map.
Tap the respective command button to
display (On) or not (Off) Street names on
the map.
MEDION-Navigator 4.4
- 70 -
Advertisement
Table of Contents
