Fitting Medion-Navigator On Your Bike - Medion -Navigator 4.4 User Manual

2.2.5

Fitting MEDION-Navigator on your bike

Mount the fitting...
Installation and quick-start guide
7. Insert the power jack
1. Connect the clamp
clamp round the handle bar as represented above (opening
up, plate towards the driver). Do not forget to put the rubber
band , which is included in the delivery between the handle
bar and the clamp. The clamp is flexible, so you can open it
carefully, place it round the handle bar and close it.
2. Put the cradle of the device
Push the holder downwards until it snaps in noticeably. Please
note that there is only one correct position for the holder to
be fitted.
3. Fix the complete holder kit with the included screw
the screw only slightly for the moment.
into the cigarette lighter.
and the mounting plate
onto the mounting plate
MEDION-Navigator 4.4
. Pull the
.
. Fasten
- 18 -