Sharp XV-Z9000U Service Manual page 11

Remote Control
23 (7 m)
30˚
45˚
45˚
30˚
Remote Control
Using as a Wired Remote Control
3.5 mm stereo minijack cable
(commercially available)
The remote control can be used to contr ol the projec-
tor within the range shown on the left.
• The signal from the remote control can be reflected off a
30˚
screen for easy operation. However, the effective distance
of the signal may differ due to the scr een material.
Using the remote control in a dark
room
The backlights of the operation buttons can be tur ned
on for five seconds and of f by pressing BACKLIGHT.
If you want to turn off the backlights while they ar
press BACKLIGHT again.
BACKLIGHT button
When the remote control cannot be used due to the
range or positioning of the pr ojector (rear projection,
etc.), connect a 3.5 mm stereo minijack cable
(commercially available) fr om the wired remote control
jack on the top of the remote control to the Wired remote
control jack on the back of the projector .
11
XV-Z9000U/E