Flow Chart - Haug Operating Instructions Manual

6 Troubleshooting

6.2 Flow chart

The reset pushbutton flashes.
Switch off discharging power pack and
unplug ionizing units.
Disconnect signalling line K1 UL from
the discharging power pack. Switch on
the discharging power pack.
Switch off discharging power pack and
connecting a ionizing unit.
Switch on the discharging power pack.
Switch off discharging power pack and
connecting another ionizing unit.
Switch on the discharging power pack
etc.
20
Reset pushbutton
flashing?
no
Reset pushbutton
flashing?
no
Reset pushbutton
flashing?
no
Ionizing system is ok
yes
Discharging power
pack is faulty
This ionizing unit
has a fault.
yes
(Short circuit)
This ionizing unit
has a fault.
(Short circuit)
yes