Replacing Fuse - Haug Operating Instructions Manual

6.1 Replacing fuse

Damage to equipment!
An incorrect fuse in the discharging power pack may cause a defect.
This may result in a cable fire.
• Only use fuses of the specified type.
• Never use repaired fuses.
• Never bridge the fuse.
The unit type and the rated voltage are indicated on the nameplate.
1. Disconnect discharging
2. Determine and remove the
3. Detach the fuse holder (A)
4. Replace fuse and reattach
Use the following fuse only:
• 230 V = 0,25 A slow, 5 x 20 mm
• 115 V = 0,50 A slow, 5 x 20 mm
power pack from supply.
cause for the blown fuse.
using a screwdriver and lift
out.
fuse holder.
6 Troubleshooting
19