Haug Operating Instructions Manual page 10

4 Install
3. Place the discharging
4. Ensure that the discharging
5. The ground socket of the
10
power pack at the desired
location and attach with the
enclosed retaining plate, if
appropriate.
• The operation of the
discharging power pack
is not affected by the
position in which it is
installed.
• We recommend
installing the
discharging power pack
with the HV terminals
pointing downwards (to
protect them from
moisture, oil and dirt).
power pack is switched off.
discharging power pack
must be connected to
ground potential in line with
applicable standards.
• Grounding cables of at
least 1,5 mm
2
used.
must be