HAMPTON BAY MIDSIZE LAMP Use And Care Manual

All Hampton Bay lamp bases and shades (not included) are packaged by color to indicate the proper size and safety of matched
combinations. To reduce the risk of fire and to avoid the fixture from tipping over, use only these combinations and do not exceed
recommended maximum wattage. Please see the Shade Specifications for alternate shade sizing.
Assembly
1
ASSEMBLING THE LAMP
Place the shade (not included) onto the socket (1) of the
base.
Install a 60-watt maximum standard type A bulb (not
included) or a Max 9W self-ballasted LED bulb (not
included).
To ensure your new midsize lamp is working properly,
plug it into a wall outlet and turn on the switch. Save
these instructions for future use.
Troubleshooting
Problem
The bulb will not light.
The fuse blows or the circuit breaker trips when
light is turned on.
Maintenance
1. Only use a dry soft cloth to dust or wipe carefully.
2. Do not use any cleaners with chemicals, solvents or harsh abrasives.
3. Do not immerse fixture in water. Doing so will damage the wire.
Use and Care Guide
MIDSIZE LAMP
Possible Cause
The bulb is burned out.
The power is off.
The cord is not plugged in.
The circuit breaker is off.
There is an exposed wire.
NOTE: The above diagram illustrates the assembly
of your new lamp. This is a representative drawing
and is not intended to match the style of your lamp.
Corrective Action
Replace the light bulb.
Ensure the power supply is on.
Ensure the cord is plugged into the outlet.
Ensure the circuit breaker is set to the
ON position.
Discontinue use. Unplug the unit from the wall
and contact a qualified electrician or call the
Customer Service Team at 1-855-HD-HAMPTON.
1