Table of Contents
Advertisement
INSTALLING ACP LONWORKS
8
INSTALLING ACP LONWORKS
Installing ACP Lonworks
This chapter describes how to install the ACP Lonworks to use.
In order to use the ACP Lonworks, the installation should be performed by the following order.
STEP 1. Check the cautions during the ACP Lonworks installation
Before installing the ACP Lonworks, check the cautions.
STEP 2. Study the cable connections diagram of the entire system
Study the cable connection diagram of the site where the ACP Lonworks is installed.
STEP 3. Set the indoor unit address
Set the address of the ACP Lonworks not to be overlapped with the connecting indoor unit.
STEP 4. Set PI485 and connect cables
Set DIP switch of PI485 correctly, and connect RS-485 communication cable.
STEP 5. Install ACP Lonworks and connect cables
Install the ACP Lonworks, and set network and other settings.
STEP 6. Set ACP Lonworks network address
Set the network address to be able to access the ACP Lonworks through internet.
STEP 7. Set ACP Lonworks functions
Set language, peak/demand, whether to use schedule, whether to use power display, etc.
STEP 8. Set ACP Lonworks module type
Set connected product type.
STEP 9. Set Web GUI access environment
Set the access environment in Web GUI, which is the operation program of the ACP Lonworks.
STEP 10. Input indoor unit and ventilator information
Set the access environment in Web GUI, which is the operation program of the ACP Lonworks.
STEP 11. Verify and check ACP Lonworks installation
Verify and check whether the ACP Lonworks is properly installed.
The ACP Lonworks installation work needs the professional technique.
Therefore, the installation described in this chapter should be performed by the certified
installation professional. Consult the service center or the professional installation agency
certified by us about any question or request related to the installation.
Advertisement
Table of Contents
