Table of Contents
Advertisement
INSTALLING ACP LONWORKS
15
Accessing ACP Lonworks
Connecting with Lonworks BMS
After connecting with Lonworks BMS(Lonworks Building Management System), press Service
Switch of ACP Lonworks.
Then Service LED will be turned on and the Neuron ID will be sent to Lonworks BMS.
Check that Service LED is changed to normal condition(LED OFF) within 10 minutes.
If Service LED is change to normal condition, it is installed normally.
PLNWKB000
POWER
ON - OFF
ACP Lonworks
SVC
LON
SERVICE SWITCH
Advertisement
Table of Contents
