Important Safeguards
Please read all of these instructions thoroughly�
•
Keep small children away from mill at
all times.
•
Avoid contact with moving parts on
the mill.
•
Keep mill and power cord away from
stove or other heat sources.
•
The use of attachments not sold by or
recommended by the manufacturer
may cause fire, electrical shock or
other injury.
•
TURN OFF mill before unplugging from
or plugging into an electrical outlet.
•
Be sure to turn switch to off position
after every use. Make sure motor stops
completely before disassembling.
•
Mill should be unplugged from
electrical outlet before cleaning,
before assembling or disassembling
and when not in use.
•
To prevent hazardous operation or
electric shock, DO NOT put motor base
or power cord in water or other liquids.
•
DO NOT use outdoors.
2
HOUSEHOLD USE ONLY
•
DO NOT unplug from electrical outlet
by pulling on the cord. To unplug,
grasp the plug and pull.
•
DO NOT put your fingers or other
foreign objects into any of the mill's
openings while it is in operation.
•
DO NOT leave mill unattended while
in use.
•
DO NOT let cord hang over the edge of
a table or counter or touch hot surfaces.
•
DO NOT place on or near a hot gas or
electric burner or in a heated oven.
•
DO NOT clean mill by inserting
pointed objects into milling chamber,
or using running water.
•
DO NOT OPERATE: with a damaged
cord or plug, after any appliance
malfunction, is dropped, or damaged
in any manner. Return appliance to
nearest authorized service facility
for a thorough examination, and
any needed repairs, or electrical or
mechanical adjustments.