Table of Contents
Advertisement
PRESETTING THE CHANNELS
Once you have connected up this unit,
you will need to tune in the channels in
order to watch TV stations. There are two
ways that you can do this:
NOTES:
• If you want to skip any channels, refer to
page 14.
• When the unit is in the AV mode, you
can't preset the channels.
10
5J20301A P08-17
- Automatic tuning The stations will be preset in the order
- Manual tuning
AUTOMATIC TUNING
1
2
3
4
5
10
that they appear when the automatic
tuning is activated.
In this mode the TV searches until a
picture appears. If it is a station that you
want to keep, you can choose which
channel preset you want to store it on.
You repeat this procedure for each station
until you have stored all the desired
stations.
Press SETUP/MENU.
Press
or
to select the
CHANNEL SETUP mode, then
press SELECT/ENTER.
Press
or
to select the
AUTO mode, then press
SELECT/ENTER.
All available channels in your area
are automatically scanned and
stored in the memory of the unit.
When
the
unit
finds
broadcasting channel, the
mark disappears.
After scanning, the previous step
2 screen appears.
Press SETUP/MENU twice.
The unit will return to normal TV screen.
The automatic tuning will not necessarily store the channels
in the correct order (BBC1 on CH 1 etc.). If you want to
change the order of the stored channels, please see page
12.
23/4/03, 1:04 PM
MENU
CHANNEL SETUP
PICTURE
AV COLOUR PAL
LANGUAGE
PRESS:
/
/ ENTER / MENU
CHANNEL SETUP
MANUAL
AUTO
CH ALLOCATION
PRESS:
/
/ ENTER / MENU
CH position
+0
a
Searching direction
Tuning segment bar
Advertisement
Table of Contents
