Toshiba VTD1420 User Manual page 10

CONNECTION TO OTHER EQUIPMENT
Input Selection
If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing the 0/AV
button.
Press the TV/DVD button to select TV mode and
then press the 0/AV button repeatedly to select AV1
or AV2.
1. To connect the unit to a VCR
Press the 0/AV button to select AV2 to use the TV as a monitor.
To Scart socket
2. To connect the TV to a TV Game
The unit can also be used as a display device for many video games. However, due to the wide variety of different types
of signal generated by these devices and subsequent hook-up variations required, they have not all been included in
the suggested connection diagrams. Press the 0/AV button to select AV2 to use the TV as a monitor. You'll need to
consult each component's Owner's Manual for additional information.
3. To connect the TV to a camcorder
Connect the camcorder to the unit as shown.
Press the 0/AV button to select AV2 to use the TV as a monitor.
Camcorder
4. To connect the unit to another TV set (ie. a widescreen set) (see P.31)
Connect the unit and another TV set with a Scart cable.
Press the AV button on another TV to monitor the input from the Scart cable.
8
5J20301A P08-17
of VCR
Scart cable (not supplied)
To Audio/Video OUT
Audio/Video cord (not supplied)
Audio/Video cord (not supplied)
8
AV1(Scart socket)
AV2(Front-AV-input)
TV-program
Front of unit
VIDEO IN
Front of unit
VIDEO IN
Front of unit
VIDEO IN
23/4/03, 1:04 PM
AV1
AUDIO IN (R)
AUDIO IN (L)
AUDIO IN (R)
AUDIO IN (L)
AUDIO IN (R)
AUDIO IN (L)