Locking Channels - Toshiba CF19H22 Owner's Manual

Locking Channels
This feature allows you to program the "IV so that any specific channel cannot be viewed without the use of the Channel
Number buttons on the Remote Control.
There are 4 memory spaces for TV mode, 4 memory spaces for CABLE mode.
<
ADV •
MENU
Number
1
Select a channel you want to lock out. (Example: channel 4)
2
Press MENU (then ADV • or V) repeatedly
until "CH LOCK" in the Set up menu is
displayed in purple.
TViCABLE: _TV CABLE
CH pROGRAM
ADDiERASE:_ADD ERASE
CH LOCK: 0 0 0 0
LANGUAGE: _ENGLiSH F_ENCH
SPANISH
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - +
3
Press • (<) or • (>) until the channel
number you selected "4" replaces the zero
"0" in the channel lock program display.
4-
TV CABLE _TV CABLE
CH PROGRAM
ADD EI/ABE _AOD E_ABE
CH LOCK: 0 0 0 4
L_NGU_GE _EN,_L15_i FRENCi_
TO SELECT ITEM PUSH AOV
TO CC_NTROL PUSH - +
4 Repeat steps 1 to 3 for other channels.
5 Select another channel before turning offthe "IV.
If you want to know the channels you have locked out
Press MENU to display the Set up menu.
1
Select the channel you want to restore to normal viewing by pressing
the Channel Number buttons. (Example: channel 7)
2
Press MENU (then ADV • or V) repeatedly
until "CH LOCK" in the Set up menu is
displayed in purple.
3
Press < (<) or• (>) until a zero "0" re-
places the channel number ("7" in this
example) in the channel lock program
display.
4 Repeat steps 1 to 3for other channels.
TVJCA6LE VTV CABLE
CH PROGRAM
ADDfERASE:,ADD ERASE
CH LOCI(: 0 18 7 4
LANGUAGE: _ENGL_SH FRENCH
SPANISH
TO SELECT ITEM PUSH i_V
TO C(_JTRO_ PUSH - +
4-
TV_CABLE: _TV CABLE
CH pROGRAM
ADO_ERASE:PADD ERASE
_1LDCK: 0 le 0 4
LANGUAGE bENGLISH FRENCH
SPANISH
TO ,_ELECT ITEM PUSH ADV
TO CONTROL PUSH - ÷
12