.
Indicator Instruction
Indicator
System Status Indicator
Port Indicator
FAQ
Why can't I visit 192.168.110.1?
1) Check whether NIC is configured as DHCP.
2) Ensure the computer is connected to any of the LAN ports and the
indicator is on; otherwise you may change the cable and have a try
again.
3) Re-open the browser (recommend to use Google Chrome) and
visit 192.168.110.1 again.
4) Change the browser.
5) Change the cable or computer.
If all these methods fail, please restore the factory settings (hold the
Reset Button for 10s).
Why can't I access the Internet after configuration?
1) Check whether the cable is connected as the instruction, and the
indicator is on.
2) Check the Internet connection type.
a. If your ISP offers an account/password, please select PPPoE and
enter your account/password.
b. If your ISP offers the static IP address, subnet mask, gateway and
DNS, please select Static IP and enter the information.
3) If you still can not access the Internet, please contact your ISP.
Status
Off
Steady On
Fast Blinking
Slow Blinking
Off
Steady On
Blinking
Description
The router is powered off
The router is running normally
Restoring factory
settings/Rebooting
Reyee Mesh is being paired or
repeater stops
The port is not connected or the
cable disconnects
The port is connected normally
Data is being transmitting
Need help?
Do you have a question about the RG-EW1200G PRO and is the answer not in the manual?
Questions and answers