Answer A Call; Enrich Ring; Caller Display (Network Dependent) - Swissvoice Xtra 2355 User Manual

7.12. Answer a Call

If the handset is not on the charging cradle:
When the phone rings, press
If the handset is on the base station and if AUTO ANSWER is set to ON:
When the phone rings, pick up the handset to answer a call.
1. Press when idle.
2. Press or
3. Press or
4. Press or
5. Press to confirm. You hear confirmation tones.

7.13. Enrich Ring

When first call is not picked up and the same caller calls again within 5 minutes,
the ringer level of handset and base will be automatically set to maximum, in order
to alert elderly people or people who may be far from the telephone aware of the
phone that is ringing.
1. Press on the handset in idle mode.
2. Press or
3. Press or
4. Press to confirm. You hear confirmation tones.
If disable Forced ringer feature.
1. Repeat the above item to 1 to 2.
2. Press or
3. Press to confirm. You hear confirmation tones.
8.

CALLER DISPLAY (Network dependent)

This feature is available if you have subscribed the Caller Line Identification service
with your telephone service provider.
Your phone can store up to 30 received calls with date/time information in the
Call List. The number will be shown on the LCD when the phone is ringing.
If the numbermatches with one of the entries in your Private Phonebook,
the caller's name storedin the private phonebook will be displayed with
the number.
to answer a call.
to select HS SETTING, then press
to select AUTO ANS., then press
to select ON.
to select BS SETTING, then press
to select FORCED, then press
to select FORCED, then press
.
.
.
to select ON.
to select OFF.
26