Kasanova KWI000032 Instruction Manual page 16

16
TEILBESCHREIBUNG
1. Körper 2. Plastikfuß 3. Aluminiumplatte 4. Gerade Metallrohr 5.
Gummidosen 6. Heizelement 7. Grill 8. M4 Schraube
VOR DER ERSTEN MESSUNG
1. Remove any packaging materials from the appliance.
2. Clean the grill rack and its accessories.
3. Fasten the 4pcs of plastic feet on the back side of the body. See pic. No.2
below.
4. Put water in the body up 1 L. max and not less than 0.4 L. as the marking
says.
5. Insert the straight iron bar through the 2 holes of the aluminium plate and
body situated on the two sides.
6 Place the two rubber sockets on both ends of the iron bar on the left &right
sides to avoid overheating. See pic.No.5 below
7. Fix the heating element in the body and on the aluminium plate with a
M4x35 Screw. See picture no.8 below
8. Fix the grill rack on top.
9. Let the grill heat up for a moment without any food on the rack.
This will reduce the smell when first switching on a new grill (a slight smell and
a little smoke may be emitted, ensure sufficient ventilation)