Using The Camera - Celestron VistaPix 8x32 User Manual

7.Basic maintenance
o
Operating Environment: 41 to104 F(5 to 40 C). 20%-85% relative
humidity,non-condensing.
Care of your VistaPix
7 -1.Never immerse VistaPix into any fluid or liquid. Remove dust or stains
with a soft cloth dampened with water or neutral detergent. Keep in a dry
and cool dust-free environment when not in use.
7 -2.Take the batteries out when VistaPix is not to be used over a long
period.
7 -3. Avoid dropping the VistaPix. Do not disassemble VistaPix.
P.12
o o o

4.Using the Camera

Use this product under good lighting conditions, avoid facing light source
directly. Remember to keep a distance of at least 49 feet (15 meters) away
from the target when taking a photo. As you press the "Shutter/Set" button,
hold the binocular very steady until you hear a "Beep" sound. If the binocular
is unsteady, the camera will not focus well and blurred images will result.
4-1 Turn on the power by pressing
two beep sounds. The monitor will display picture number and resolution.
Press again to power off.
4-2 Press Up-down button to zoom in and out. It can magnify the image
up to 32x as seen on the LCD display.
4-3 Press the Shutter button
you hear a beep sound.
4-4 Press the Movie button and a beep sound will signal that recording
has begun. The green power indicator light will blink while recording is in
progress. Press the Movie button
Function
5
4
1
2
button for 3 seconds and you will hear
to take pictures. Shooting is completed when
again to stop recording.
Button
NO INDICATORS ITEMS
1 Power / menu
3
2 Movie / delete
2
3 Shutter / OK
1
4 Zoom in / up
5 Zoom out / down
Monitor
NO INDICATORS ITEMS
3
Number of Images Remaining
1
4
2 Image resolution
5
0.3MP, 2.0MP ,
3 Movie mode
4 SD card mode
5 Auto shooting mode
6
6 Battery level
7
7 Memory gauge
3.0MP
P .5