Device Setup - ageLOC ME STARTER KIT User Manual

DEVICE SETUP

1
1. Standby
Hold select button for 3 secs to turn on
6. Set date
2
5. Select language
set date appears for 3 secs
language flashes to highlight item selected
select button pressed to select
11. Scroll day
10. Select month
3
day scrolled through :
month selected through :
16. ...or pm
15. Select am
...or pm selected through :
am selected through :
21. Setup complete
20. Select minutes
setup complete appears for 3 secs
time confirmed through :
6
Install the batteries*
• Remove the cover to the battery
compartment at the bottom of
the device. 2. Loading screen
• Insert four (4) alkaline batteries with
flat end of battery (-) going against the
spring.
• Replace the cover.
* Make sure to only use good quality brand lithium
or alkaline batteries in your ageLOC Me device.
7. Scroll year
Select language
• If the device is off, turn it on by tapping the
Menu button (
• Use the arrow buttons (
preferred language.
• Press the Select button ( ) to confirm
your selection.
12. Select day
NOTE: The default language is English. You may
change your language selection at any time from
the Settings menu.
Set current time
and
• Use the arrow buttons (
the 12 or 24-hour clock format.
• Press the Select button ( ) to confirm
17. Scroll hour
your selection.
• If you select the 12-hour format, choose
a.m. or p.m.
• Adjust the hour using the left arrow ( )
to go down and the right arrow ( ) to go
up, then press Select ( ).
• Adjust the minutes using the left arrow
( ) to go down and the right arrow ( )
to go up, then press Select ( ).
NOTE: It is important that you set your current
time to enable the ageLOC Me device to deliver
the proper day or night regimen.
ageloc logo appears for 3 secs
).
year scrolled through :
day confirmed through :
hour scrolled through :
3. Set langua
8. Select yea
) to select your
and
13. Set time
) to choose
18. Select ho
and
select lan
year sele
select lang
hour selecte