Smart Diagnosis Function
32
Press Power button.
▶ Close the washer door and press Power button.
Place your smart phone on the Smart
Diagnosis tag logo.
▶ Make sure that the front side of your smart phone
with speakers on it faces the Smart Diagnosis tag
logo.
Press and hold Cold wash button to start
Smart Diagnosis.
▶ Place your smart phone close to the Smart
Diagnosis tag log, and press and hold Cold wash
button until you hear 'tick tick' crackling sound.
If you pressed other buttons or dials before pressing "Cold Wash"
button, turn the power off and start again.
Keep holding your smart phone while data is transmitting.
▶ Keep placing your smart phone on the Smart Diagnosis tag logo while data is transmitting
for Smart Diagnosis. The time remaining to data transmission displays on the screen.
The transmission noise may be irritating.
For better result of diagnosis, do not remove your smart phone until the
transmission noise stops.
Press Power button to stop the diagnosis function and the noise.
Receive results of diagnosis with an explanation from a service
representative when the data transmission is complete.
▶ When the data transmission is complete, power will be automatically off after a few
seconds as "End" indicator appears.
Take actions following the diagnosed and analyzed results and explanation from a service
representative.