Functions Of Each Button - LG T4432S0Z User Manual

Functions of each button

Washing progress display
● Washing cycle in progress
displays.
● The light is on for the cycle to
progress, blinks for the cycle in
progress, and off for the
completed cycle.
Program button
● Select when you want to
program the wash.
● If you want to cancel the
program , turn the power
off. (p25)
Water Wave button
● Select when you want to
adjust water Wave when
washing.
● It is set to "Medium
Wave" by default and it
does not display on the
control board. Adjust
water Wave strength by
pressing Powerful Wave
or Delicate Wave button.
(Water Wave adjustment
is available for all cycles
except for standard60˚c,
wool/delicate, Tub Clean
cycle.)
12
The time remaining, programmed time, malfunction warning light
● The time remaining until completion displays while the washer is running.
i.e.) Displayed time during operation or pause indicates the time remaining until
completion of washing, rinse, and spin-dry.
(Based on standard cycle water level 1)
● If the washer malfunctions, the light blinks immediately with alarm sound and
displays malfunction. With proper actions taken, the washer will run as normal
again.
Hot, cold wash button
● Press when selecting hot, cold, or lukewarm water.
● It can be changed while the washer is running.
● If you select Hot Wash only, hot water will be supplied for
washing and both hot/ cold water will be supplied for rinsing.
● Only cold wash can be selected in the "wool/delicate" cycle.
(If hot water is used, it may damage the laundry.)
● Lukewarm water mixes hot and cold water when "hot wash +
cold wash" is selected. The proper mix of hot and cold water
provides the right water temperature for washing.
※ Standard 40˚c and standard 60˚c cycles have relatively high
supply of hot water because the temperature set for heating is
higher than the ones of other cycles.
● If standard 40˚c, standard 60˚c, Intensive, or Tub Clean cycle
is selected, "cold wash" or "hot wash" is automatically
selected.
Water level button
(detergent amount displayed)
● Select when you want to adjust
water level.
● It can be changed while the
washer is running.
● Add detergent following the
amount displayed next to water
level.
● Detergent displayed indicates
concentrated detergent. (p 9)