Standard 40°C Cycle - LG T4432S0Z User Manual

Standard 40˚C cycle
1
2
3
4
5
● "Cold wash", "Hot wash" is selected for Standard 40˚c cycle, and the water supply valve
may repeat open/close to adjust the water temperature for washing.
※ Standard 40˚c cycle has relatively high supply of hot water because the temperature set for
heating is higher than the ones of other cycles.
※ Stains well-removed in 40˚c : Coffee, Coke, Orange juice, Grape juice, Soy sauce, etc.
● If only a hot wash is selected, the washing time reduces due to its shorter heating time.
● In only a cold water hose is connected, the washing time takes longer due to its loner
heating time. Use by connecting cold and hot water together.
● The washer tub rotates in one direction slowly while heating. It is a normal operation.
● Condensation may form on glass door while heating due to humidity difference caused by
heating. It is normal. Wipe after the wash.
● Be careful of the product exterior. It may be hot from heating.
Press Power button.
Add laundry, and press Cycle button to select "Standard 40˚C" cycle.
● Water level higher than "6" cannot be selected.
● Make your wash load less than 5kg.
● "Cold wash", "Hot wash", rinse "2"times, and spin "Medium" is
automatically selected. If you want to change, press each button to change.
● It is set to "Medium Wave" by default and can be changed by selecting
Water Wave button.
Add detergent following the amount indicated next to water level display,
and close the lid.
Press Start/Pause button.
Water will be supplied, and the wash will begin after the water supply.
Power will be off automatically about 10 seconds after buzzer goes off.
15