Download Print this page
HAMPTON BAY 62944 Use And Care Manual

HAMPTON BAY 62944 Use And Care Manual

Led low voltage path light

Advertisement

Available languages

Available languages

Quick Links

PACKAGE CONTENTS
A - Fixture head
for 4 x 4 post
x 1
Assembly and Installation
1
Attaching and installing the light
WARNING: Risk of electric shock do not install the light
within 10 ft. (3.05 m) of a pool, spa or fountain.
□ Connect the male connector (C) with the female connector (E).
Option 1: Installing on 6 x 6 post
□ Put the fixture head (A) with 6 x 6 adaptor (B) (pre-installed) on the 6 x 6
post and attach it with screws.
Option 2: Installing on 4 x 4 post
□ Remove the 6 x 6 adaptor (B) by loosening the screw on the adaptor.
□ Attach the 4 x 4 fixture head on a 4 x 4 post.
E
C
Use and Care Guide
LED Low Voltage Path Light
A
B - 6 x 6 adaptor
(pre-installed)
x 1
6 x 6 Post
4 x 4 Post
C
B
C - Connector
D - Connector with
96 inch wire length
(attached to fixture)
x 1
2
Connecting the wires
□ Detach and place the wire connector (D) on opposite sides of the low
voltage cable (not included) from the transformer (not included) where
the fixture will be located.
□ Align and fit the main low voltage cable vertically in the slot of the wire
connector as shown.
□ Press the wire connector (D) together until it is fully seated and locked
around the cable. Pre-set prongs will pierce the cable insulation and
establish contact. Turn on the power unit. If the light fixture does not
turn on, repeat operations 2 and 3.
□ Once the clip-on connector is in place, we recommend wrapping it in
electrical tape (not included) for additional protection.
D
D
Please contact 1-855-HD-HAMPTON for further assistance.
Item #1005 697 331
D
E - Female connector
(connecting with D)
x 1
x 1
WARNING: The connector contacts (D) have sharp edges
for piercing the main low voltage cable. To avoid injury,
do not touch the metal contacts.
CAUTION: The wire from the low voltage power unit shall
be 12-16 AWG type underground Low Energy Circuit
Cable.
IMPORTANT: Protect the wiring by routing it in close
proximity to the light or next to a building structure such as
a house or deck.
Do not bury the wiring by more than 6 in. (15.24 cm) in order
to connect to the main secondary wire.
Do not submerge fixtures in water.
D
Model #62944
F
E
F - Screw
x 2
HAMPTONBAY.COM

Advertisement

loading

Summary of Contents for HAMPTON BAY 62944

  • Page 1 Item #1005 697 331 Model #62944 Use and Care Guide LED Low Voltage Path Light PACKAGE CONTENTS A - Fixture head B - 6 x 6 adaptor C - Connector D - Connector with E - Female connector F - Screw...
  • Page 2 Cable Selection 12 VOLT TAP Cable Length Total Fixture Wattage 0-50 feet 51-100 feet 101-150 feet 0-60 Watts 16 AWG 16 AWG 14 AWG 61-120 Watts 16 AWG 14 AWG 12 AWG 121-180 Watts 14 AWG 12 AWG NOT RECOMMENDED 181-240 Watts 14 AWG 12 AWG...
  • Page 3 Artículo Núm. 1005 697 331 Modelo Núm.62944 Guía de uso y cuidado Lámpara para sendero de luz LED y bajo voltaje CONTENIDO DEL PAQUETE A - Cabezal de la lámpara B - Adaptador de 6 x 6 C - Conector...
  • Page 4 Selección del cable ENCHUFE DE 12 V Longitud del cable Vataje total de la lámpara De 0 a 15.2 metros De 15.5 a 30.5 metros De 30.8 a 45.7 metros De 0 a 60 W Calibre 16 AWG Calibre 16 AWG Calibre 14 AWG De 61 a 120 W Calibre 16 AWG...

This manual is also suitable for:

1005697331