Os Auto Update; Backup/Restore; Ethernet Settings - ABB NEXUS Series User Manual

OS AUTO UPDATE

Permits whether to allow or disallow automatic YUM updates. It is recommended that this setting be left at
" ".
Enabled

BACKUP/RESTORE

provides the means to backup an
Backup /Restore
port and driver configuration, etc). To create a backup, simply click the

ETHERNET SETTINGS

The
Ethernet Settings
Series device can support static IP addresses or
appropriate address setting for your application.
•
To configure the device to use
most DHCP environments, a resolvable
device by the local network administrator prior to configuring the device for this option.
•
To configure the device to use a static IP address, select the
enter your
IP address
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
area permits for Ethernet address configuration of the
DHCP addressing, select the
DNS
, , , and
Subnet Mask Gateway
Software Configuration
NEXUS Series |
ASPECT target's device configuration (network addresses,
Download
DHCP addressing from a valid
Obtain an IP Address Automatically
name or reserved IP address
Use the following IP Address
DNS information into the boxes provided below.
button.
NEXUS Series device. The
DHCP server. Simply select the
radio button. In
is assigned to the NEXUS Series
radio button, then
NEXUS
30