Synchronising - BMW F 800 GS Rider's Manual

Acknowledgement tone sounds
5
twice.
You can now register a maximum
64
of four remote control units with
the anti-theft alarm. Registration
is a three-step process and has
to be repeated for each remote
control unit.
Press and hold down button 1
and button 2.
LED flashes for ten seconds.
As soon as the LED goes out,
release button 1 and button 2.
LED lights up.
Press button 1 or button 2.
z
Alarm tone sounds once.
LED goes out.
Remote control has been re-
gistered.
Repeat this three-step proced-
ure for each additional remote
control.
Termination of
registration
Registration is terminated in the
following situations:
4 remote control units have
been logged on.
Ignition is switched OFF.
30 seconds elapse without a
button being pressed after the
ignition has been switched off.
30 seconds elapse without a
button being pressed after a
remote control unit has been
registered.
When registration terminates the
LED flashes and the acknow-
ledgement tone sounds three
times.

Synchronising

with alarm system (DWA)
When is it necessary to
synchronise the remote
control?
The remote control has to be
synchronised if the buttons of
the remote control have been
pressed more than 256 times
outside the receiver's range.
Once this limit has been reached,
the receiver on the vehicle will no
longer react to the signals from
the remote control.
OE