Synchronising - BMW R nineT Rider's Manual

Termination of
registration
Registration is terminated when
4 remote control units have
been registered
the ignition is switched off
30 seconds elapse without a
button being pressed after the
ignition has been switched off
30 seconds elapse without a
button being pressed after a
remote control unit has been
registered
When registration terminates the
LED flashes and the acknow-
ledgement tone sounds three
times.

Synchronising

with anti-theft alarm OE
When is it necessary to
synchronise the remote
control?
The remote control has to be
synchronised if the buttons of
the remote control have been
pressed more than 256 times
outside the receiver's range.
Once this limit has been reached,
the receiver on the motorcycle
will no longer react to the signals
from the remote control.
Synchronising remote
control
Press and hold down button 1
and button 2.
LED flashes for ten seconds.
As soon as the LED goes out,
release button 1 and button 2.
LED lights up.
Press button 1 or button 2.
LED goes out.
Remote control has been syn-
chronised.
5
51
z