Stopwatch - BMW F 800 GS Rider's Manual

Stopwatch

with on-board computer
Stopwatch function
You can switch from the odo-
meter reading to a stopwatch 1.
The readout is in hours, minutes,
seconds and tenths of a second,
with dots as separators.
The stopwatch continues to time
in the background if you switch
back temporarily to the odometer
reading. Similarly, the stopwatch
continues timing if you temporar-
ily switch off the ignition.
Operate stopwatch
OE
If necessary, use button 1 to
switch from the odometer to
the stopwatch.
When the stopwatch is
stopped, press button 2 to
start timing with the stopwatch.
When the stopwatch is running,
press button 2 to stop timing
with the stopwatch.
Press and hold down button 2
to reset the stopwatch.
Swap key functions
Switching on ignition (
Press button 1 and button 2
at the same time and hold
them down until the reading
changes.
FLASH
(redline warning) ap-
pears, along with
Press button 2.
LAP
(Laptimer) and
OFF
are displayed.
Repeatedly press button 1 until
the reading shows the mode
you want.
ON
: stopwatch operation using
the INFO button on the left-
hand multifunction switch.
38).
4
45
z
ON OFF
or .
ON
or