4. General safety instructions happen nevertheless, pull out the power cord and have the device checked and/or repaired by the Trotec customer service. Please observe the following safety instructions! • The device may only be opened, cleaned on the inside and repaired Any non-compliance with these instructions may by authorised and appropriately trained personnel.
In this process, the humidity in the air is removed by means of the absorbent (silica gel) and bound (adsorption). Fig.: Functional principle TTR 160/250 After having passed the section, dry air (6) is released into the space. User instructions – Adsorption dehumidifier TTR 160/250...
The air volume must be adjusted until the value defined as optimum heating flow is displayed at the ampere meter. User instructions – Adsorption dehumidifier TTR 160/250...
Cleaning of the interior and the integrated components may only be car- The device can be switched off at the power switch (6). The integrated ried out by trained personnel or the Trotec customer service. control indicator will go out.
200 °C! Immediately before commissioning the dehumidifier, the following re- quirements must be fulfilled: • The dehumidifier may only be used according to the parameters specified in chapter "Technical data". User instructions – Adsorption dehumidifier TTR 160/250...
14 kg 19 kg Drying air connection 100 mm 100 mm Moist air connection 63 mm 80 mm Sound pressure level (within a distance of 1 m) 56 dB(A) 57 dB(A) at 20 °C/60% rh User instructions – Adsorption dehumidifier TTR 160/250...
Page 13
Spare parts TTR 160 Item Designation Article number Item Designation Article number Housing P 1000 1033 Gear motor P 1000 1038 Cover P 1000 1033 Toothed belt disc P 1000 1064 Rotor cartridge P 1000 1033 Compression spring P 1000 1055...
Page 14
Spare parts TTR 250 Item Designation Article number Item Designation Article number Housing P 1000 1032 Filter mat P 1000 1194 Cover P 1000 1032 Gear motor P 1000 1038 Rotor cartridge P 1000 1032 Toothed belt disc P 1000 1066 Clamping rubber P 1000 1059 Compression spring...
Page 15
This declaration is only valid in the version we have put into circulation. FR- Nous, Trotec GmbH, déclarons par la présente que la conception de la machine a été développée, construite et fabriquée conformément aux directives européennes en vigueur et qu'elle satisfait aux exigences fondamentales de sécurité...
Page 16
GmbH Grebbener str. 7 d-52525 heinsberg +49 2452 962-400 +49 2452 962-200 info @ trotec.com www.trotec.com...