Advertisement
EMF40310
PRE-OPERATION CHECKS
w
If any item in the pre-operation check is
not working properly, have it inspected
and repaired before operating the out-
board motor. Otherwise, an accident
could occur.
Fuel
8 Check to be sure you have plenty of fuel
for your trip.
8 Make sure there are no fuel leaks or
gasoline fumes.
8 Be sure the fuel hose is not being flat-
tened or kinked by objects in the boat, and
that there are no sharp objects near it.
Oil
8 Check to be sure you have plenty of oil
for your trip.
Controls
8 Check throttle, shift, and steering for prop-
er operation before starting the engine.
8 The controls should work smoothly,
without binding or unusual free play.
8 Look for loose or damaged connec-
tions.
8 Check operation of the starter and stop
switches when the outboard moter is in
the water.
Engine
8 Check the engine and engine mounting.
8 Look for loose or damaged fasteners.
8 Check the propeller for damage.
8 Check that the battery is in good condi-
tion and battery connections are secure.
3-7
GB
Advertisement
Chapters
