Advertisement
q
w
N
ON
START
OFF
701022
If an engine fails to start, use the follow-
ing procedure.
1) Adjust the trim angle so that the
engine is vertical or trimmed in.
000859
2) Disconnect the Yellow/White emer-
gency connector. The ignition timing
advance circuit of the microcomputer
is bypassed.
1 CDI unit
2 Yellow / White cord
216016
3) Open the throttle slightly without
shifting using the neutral throttle
lever or the free accelerator.
After the engine starts, return the
throttle to the original position.
701014
4) Be sure the engine is in Neutral and
that the lanyard is attached to the
engine stop switch. The main switch
must be on.
5) Start the engine.
5-9
GB
Advertisement
Chapters
