Operation - tibelec 0900002 Instructions Manual

2 v and 24 v battery tester
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6

2. Operation :

a. Insert the male jack of one of the leads into the output jack of the battery tester
b. Press the back-light pushbutton to switch on the screen (it will remain lighted for
5 seconds)
c. Set the selector to 12 or 24 V
d. Connect the clips, lugs or cigarette lighter adapter to the battery to be tested
e. Read the value displayed, referring to the table below.
A/12 V battery test
Battery
voltage
<5,0V
-
5,0-11V
-
11-12V
12-12,5V
12,5-13V
13-13,7V
13,7-14V
14-15V
15-17V
Indications
-
-
-
5,0-11V
-
11-12V
-
12-12,5V
-
12,5-13V
13-13,7V
-
13,7-14V
14-15V
15-17V
Extreme
discharge
indicator
The voltage is less than
yes
5,0V, charge immediately
or replace
The voltage is less than
yes
11V, charge immediately
Low battery, charge
no
immediately
Battery charge OK,
no
can be used but charge
soon
Battery charge OK,
no
can be used but charge
soon
Battery fully charged,
no
can be used
Charging is functioning
no
correctly
Charging in progress, the
battery will soon be fully
no
charged
no
The battery is over-charged
Comments
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mw336

Table of Contents