Hints And Tips - Progress PI3550 User Manual

22 progress
• The related programme indicator
comes on.
• The wash indicator comes on.
6. Close the appliance door. The pro-
gramme starts.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button again and again
until the indicator of the number of
hours you want to set flashes. You can
set 3, 6 or 9 hours.
3. Close the appliance door. The count-
down starts.
• The delay indicator stops flashing.
• The wash indicator goes off.
• When the countdown is completed, the
programme starts.
– The wash indicator comes on.
– The delay indicator goes off.
You can set a programme and the de-
lay start also with the appliance door
closed. In this condition, you have only
3 seconds after each setting before the
appliance starts to operate.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start
Press and hold function buttons (B) and (C)
at the same time until the delay indicator

HINTS AND TIPS

The water softener
Hard water contains a high quantity of min-
erals that can cause damage to the appli-
ance and bad washing results. The water
softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is im-
portant to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.
Loading the baskets
Refer to the supplied leaflet with exam-
ples of the load of the baskets.
goes off and all the programme indicators
come on.
When you cancel a delay start, the ap-
pliance goes back to setting mode.
You have to set the programme again.
Cancelling the programme
Press and hold function buttons (B) and (C)
at the same time until all the programme in-
dicators come on.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, the
end indicator comes on and the wash indi-
cator goes off.
1. Press the on/off button to deactivate the
appliance. The on/off indicator goes off.
2. Close the water tap.
• Let the dishes become cold before
you remove them from the appli-
ance. Hot dishes can be easily dam-
aged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and
on the door of the appliance. Stain-
less steel becomes cool more quick-
ly than the dishes.
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items made
of wood, horn, aluminium, pewter and
copper.
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove remaining food from the items.
• To remove easily remaining burned food,
soak pots and pans in water before you
put them in the appliance.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that cutlery and dishes do not
bond together. Mix spoons with other
cutlery.