Table of Contents
Advertisement
EXTERIOR LIGHTING
CONTROLS
Control stalk for the selection and con-
trol of the various front and rear lamps
providing the vehicle's lighting.
Main lighting
The various front and rear lamps of the
vehicle are designed to adapt the driv-
er's visibility progressively in relation to
the climatic conditions:
-
sidelamps, to be seen,
-
dipped beam headlamps to see
without dazzling other drivers,
-
main beam headlamps to see clearly
when the road is clear.
Additional lighting
quirements of particular driving condi-
tions:
-
a rear foglamp to be seen from a
distance,
-
front
foglamps
for
forward vision,
-
directional headlamps for improved
visibility when cornering,
-
daytime running lamps to be seen
during the day.
Programming
Various
automatic
lighting
modes are also available depending on
options:
-
guide-me-home lighting,
-
automatic lighting,
-
directional lighting.
Model without AUTO lighting
Model with AUTO lighting
even
better
control
VISIBILITY
Manual controls
The lighting commands are issued di-
rectly by the driver by means of the
ring A and the stalk B .
A. Main lighting mode selection ring:
turn it to position the symbol required
facing the mark.
Lamps off.
Automatic illumination of
headlamps.
Sidelamps only.
Dipped headlamps or main
beam headlamps.
B. Stalk for switching headlamps: pull
to switch the lighting between dipped
headlamps/main beam headlamps.
In the lamps off and sidelamps modes,
the driver can switch on the main beam
headlamps
temporarily
Displays
Lighting of the corresponding indicator
the switching on of the lighting selected.
("headlamp
93
Advertisement
Table of Contents
