Table of Contents
Advertisement
11
PRACTICAL INFORMATION
Switch on the compressor by moving
the switch B to position "1" until the
tyre pressure reaches 2.0 bars.
Remove the kit, taking care to avoid
to avoid staining your vehicle with
reduced speed (between 15 and
the puncture.
Stop to check the repair and the tyre
pressure using the kit.
Turn the selector A to the AIR
position.
Connect the black pipe D to the
valve of the wheel.
166
i
If after around 5 to 7 minutes the
pressure is not attained, this indi-
cates that the tyre is not repairable;
contact a PEUGEOT dealer for as-
sistance.
You can use this kit for the routine
i
check and adjustment of the tyre
pressures on your vehicle. It can
such as a ball or bicycle tyre.
To do this, turn the selector to the
"AIR" position, connect the black
pipe with the appropriate adapter
low the remainder of the procedure
below until the kit is removed.
Advertisement
Table of Contents
