Table of Contents
Advertisement
FITTINGS
High load retaining net
Hooked onto the special upper and lower
ing volume up to the roof behind the seats
of the 2nd row.
i
When positioning the net, check
that the strap loops are visible from
or tightening easier.
116
To use the net in the 2nd row (additional
seats folded or removed):
roll up or remove the load space
screen,
unroll the high load retaining net,
position one of the ends of the net's
metal bar in the corresponding upper
1 , then do the same with the
other end,
attach the snap hook of each of the
net's straps in the corresponding
ring 2
the rear side seat belt,
tighten the straps,
check that the net is hooked and
tightened correctly.
12 V accessories socket
In order to connect a 12 V accessory
(max power: 120 Watts), remove
the cap and connect the appropriate
adaptor.
Turn the key to the ignition position.
1 ,
Hooks
ping bags.
Advertisement
Table of Contents
