Table of Contents
Advertisement
DRIVING
Displays on the instrument panel
Gear lever positions
N. Neutral
R. Reverse
1, 2, 3, 4, 5, 6. Gears in sequential mode
AUTO. This comes on when the auto-
matic mode is selected. It switches off
on changing to sequential mode.
S.
Foot on brake
Press the brake pedal when
(e.g.: when starting the en-
i
An audible signal is heard when re-
verse gear is engaged.
144
Moving off
Select position N .
Press the brake pedal down fully.
Start the engine.
N appears on the instrument
panel screen.
reverse (position R
Release the parking brake.
Take your foot off the brake pedal,
then accelerate.
AUTO and 1 or R appear on
the instrument panel screen.
i
N
accompanied by an audible signal
and a message on the multifunc-
tion screen, if the gear lever is not
in position N on starting.
Foot on brake
strument panel, accompanied by an
audible signal and a message on
the multifunction screen, if the brake
pedal is not pressed on starting.
Hill start assist
This is an additional function associated
immobilisation of your vehicle.
It maintains the pressure of the brakes
your foot from the brake pedal to the
accelerator pedal.
M or A
It comes into operation if the vehicle is
immobilised by pressing the brake pedal
and depending on the gradient:
-
on an ascending gradient, with the
vehicle stationary, gear lever in posi-
tion A or M
when the brake pedal is released,
-
on a descending gradient, with the
vehicle stationary, gear lever in po-
sition R
when the brake pedal is released.
i
Do not hold the vehicle using the
accelerator.
!
Never leave the vehicle during a
hill start assist phase.
Advertisement
Table of Contents
