Download Table of Contents Print this page

Get Started; Install Batteries; Connect Power - Philips 2000 Series User Manual

Hide thumbs Also See for 2000 Series:

Advertisement

Table of Contents
3

Get started

Always follow the instructions in this chapter in
sequence.

Install batteries

Caution
Risk of explosion! Keep the batteries away from heat,
sunshine or re. Never discard batteries in re.
Batteries contain chemical substances, so they should
be disposed of properly.
Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the set.
Insert 2 x 1.5V R20/UM1/D batteries (not provided)
with correct polarity (+/-) as illustrated.

Connect power

Connect the supplied AC power cord to:
the AC MAINS jack on the main unit.
the wall outlet.
Caution
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the
back or underside of the portable radio.
Risk of electrical shock! When you unplug the power
cord, always pull the plug from the socket. Never pull
the cord.
4
EN
Note
The type plate is located at the bottom of the portable
radio.

Advertisement

Table of Contents
loading

This manual is also suitable for:

R2506Tar2506/12

Table of Contents