Advertisement
Step 5: Mounting the wall fixtures
1. Mount the cabinet to the wall with the covering panel via the wall brackets (3 brackets) and
tapping screws (3 screws) for later stabilisation (3 nails for wall mounting included) (fig. 7).
2. Place the shelf boards in the middle section of the cabinet and fix them at required height
(fig. 8).
Step 5 / Fig. 7
Mounting the workbench
Step 6: Mounting the side panels
1. Place the left side panel and connect it to the back wall via the groove, so that both elements
form one line.
2. Then turn the left side panel vertical at a 90° angle inwards. Ensure that the rails for the doors
are facing inward as well. Repeat the procedure for the right side panel (fig. 9).
3. Mount the front frame with the tapping screws (fig. 10).
Step 6 / Fig. 9
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
3 pieces
3 pieces
Item 60237, 60238
Step 5 / Fig. 8
Step 6 / Fig. 10
Page 9
01
2021-1
Advertisement
