Advertisement
Quick Links
Operation Manual
Wall-Mounted Workshop Cabinet
60237, 60238
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Summary of Contents for WilTec 60237
- Page 1 Operation Manual Wall-Mounted Workshop Cabinet 60237, 60238 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 • open cabinet with shelves • Perforated rear wall 3-piece Grey-black workbench: perfor- • large worktop ated wall • drawer • open compartment • cabinet with door © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 4 Name Illustration Qty. Left side panel Shelf board Right side panel Door hinge Perforated wall Washer Front frame Wall nails Cover panel Upper door hinge © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 Divider Wall bracket Door Tapping screw © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 5 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 6 Front frame Washer Cover panel Stand Divider Upper door hinge Door Lower door hinge Table leg Self-locking screw Sliding rail Tapping screw Drawer bottom © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 7 2. Then turn the right side panel at a 90° vertical angle inwards. Ensure that the guide rail for the door is also facing inwards. © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 7 http://www.WilTec.de...
- Page 8 3. Then adjust the door, ensure that the top hole of the door matches up with that of the cover panel. Step 3 / Fig. 5 Step 4 / Fig. 6 Step 4 / Fig. 6b © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 8 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 9 Repeat the procedure for the right side panel (fig. 9). 3. Mount the front frame with the tapping screws (fig. 10). Step 6 / Fig. 9 Step 6 / Fig. 10 © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 9 http://www.WilTec.de http://www.aoyue.eu...
- Page 10 3. Then adjust the door, ensure that the top hole of the door matches up with that of the cover panel. Then attach the upper door hinge (fig. 13). Step 8 / Fig. 13b Step 8 / Fig. 13 Step 9 / Fig. 14 © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 10 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 11 2. Then connect the front and back panel of the drawer via the tapping screws to the drawer (fig. 16). 3. Then place the metal rails on the right and left side of the drawer (fig. 16). Step 10 / Fig. 16 © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 11 http://www.WilTec.de http://www.aoyue.eu...
- Page 12 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 60237, 60238 Page 12 http://www.WilTec.de...