Advertisement
Assembly
We recommend the following tools for assembly (not included in the delivery):
At least 2 persons should assemble the product.
Note:
Only use suitable tools for the assembly and regard all safety notes. Wear adequate working
gear (slim-fitting tops, working trousers, gloves, working shoes and if necessary protective glasses and
respiratory protection).
Mounting the Hanging Cabinet
Step 1: Mounting the left side panel
1. Place the left side panel vertically and connect it to the back wall via the groove, so that both
elements form a line.
2. Then turn the left side panel at a 90° vertical angle inwards. Ensure that the guide rail for the
door is also facing inwards.
Step 1 / Fig. 1
Step 2: Mounting the right side panel (same procedure as step 1)
1. Place the right side panel vertically and connect it to the back wall via the groove, so that both
elements create one line.
2. Then turn the right side panel at a 90° vertical angle inwards. Ensure that the guide rail for the
door is also facing inwards.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 60237, 60238
Step 2 / Fig. 2
Page 7
01
2021-1
Advertisement
