Sennheiser Digital 6000 Instruction Manual page 10

Word clock sampling rates
Network
Dante™
(only EM 6000 DANTE)
Power supply
Power consumption
Power plug
Dimensions (HxWxD with
mounting elements)
Weight
SKM 6000
Frequency range
Switching bandwidth
Frequency stability
Tunability
Lower frequency limit (-3 d B)
RF output power
Audio frequency response
Audio amplification
Operating time
Dimensions (LxD)
Weight
SK 6000
Frequency range
Switching bandwidth
Frequency stability
Tunability
Lower frequency limit (-3 d B)
RF output power
Audio frequency response
Audio amplification
Mic/Line input
Instrument cable emulation
Antenna output
Operating time
8 | Digital 6000
48 kHz, 96 kHz
IEEE 802.3-2002 (10/100 Mbit/s),
shielded RJ-45 connection
IEEE 802.3 (1000 Mbit/s),
shielded RJ-45 connection
100 - 240 V ~, 50/60 Hz
Max. 35 W
3-pin, protection class I as per IEC/EN 60320-1
44 x 483 x 373 mm
approx. 5.2 kg
470.200 to 718.000 MHz
Information about country-specific frequency variants can be found
beginning on page 104.
88 MHz
< 5 ppm
25 kHz steps
Adjustable: 60 Hz, 80 Hz, 100 Hz, 120 Hz
LR Mode: 25 mW rms
LD Mode: 1 mW rms
LR Mode: 30 Hz - 20 kHz (3 dB)
LD Mode: 30 Hz - 14 kHz (3 dB)
Can be set in 3 dB steps from 0 dB to +62 dB (for each capsule)
5.5 h (with BA 60 accupack)
270 x 40 mm
Approx. 350 g (with BA 6 0 accupack and ME 9 005 microphone module)
470.200 to 718.000 MHz
Information about country-specific frequency variants can be found
beginning on page 104.
88 MHz
< 5 ppm
25 kHz steps
Mic/Instruments/Line: adjustable, 30 Hz, 60 Hz, 80 Hz, 100 H z, 120 H z
LR Mode: 25 mW rms
LD Mode: 3.5 mW rms
LR Mode: 30 Hz - 20 kHz (3 dB)
LD Mode: 30 Hz - 14 kHz (3 dB)
Mic: adjustable in 3 d B steps from 0 dB to +42 dB
Instruments/Line: adjustable in 3 d B steps from -6 dB to +42 d B
3-pin audio socket
Adjustable cable length with 3 steps
Coaxial socket
6.5 h (with BA 61 accupack)