Com Log; System Setup - Wieland WIENET SDS Series Manual

5.8.4

COM log

This page displays the current COM log stored in the device. The desired COM port number can be
selected from the COM x Log drop-down list in Figure 26, which allows it to display logs from differ-
ent COM ports. Note that wienet SDS-xB has only one COM port (COM1) while wienet SDS2-TB has 2
COM ports. An example of COM 1 Log is shown in Figure 26. Each record of the log consists of Time,
COM # (or Index), Direction (T/R) and Data.
Figure 26: COM Datalog web page under Log Settings
Under the COM 1 Log header, there are three buttons: Refresh, Export Log, and Clear Log. First, the
Refresh button can be used to update the COM Log table below with the latest information. Second,
the Export Log button will enable the user to save the log data onto their PC. The default file name
of the exported data log will be DataLog.txt. Finally, the Clear Log button will clear all events stored
in the device and the COM Datalog will be empty with a message No data available in table. At the
end of the COM Log page, there are two hyperlinks which can be used to navigate through all rec-
ords. You can click on the Previous link to go to the previous page of the log and click on the Next
link to go to the next page.
5.9

System setup

Under the System Setup menu of web interface of wienet SDS, you can perform a number of admin-
istration tasks for the device. Figure 27 lists the sub-menu under the System Setup. It consists of
Date/Time Settings, Admin Settings, Firmware Upgrade, Backup/Restore Setting, and Ping. Each
of this sub-menu will be described in the following subsections.
Figure 27: System Setup menu
Wieland Electric GmbH | BA000870 | 06/2020 (Rev. A)
Configuration and setup
30